Kyocera ECOSYS FS-1135MFP User Manual

3-24
Basic Operation
If the connection is successful, Connected. is displayed
on the screen. Press [OK] (the Right Select key).
Completed. is displayed and the screen returns to the
basic screen.
If the connection failed, Cannot connect. is displayed.
Press [OK] (the Right Select key). The screen shown in
step 3 reappears. Check and re-enter the destination.
14 Press the Confirm Destination key to confirm the
registered destinations.
Press [Exit] (the Right Select key) to return to the basic
screen.
15 Press the Start key. Transmission starts.
NOTE: If the screen for confirming the destination before
transmission (page 8-89) is set to [On], the Confirm
Destination screen appears when the Start key is pressed.
Dest. Confirm.: a b
*********************
[ Exit ]
H RD Center

Kyocera ECOSYS FS-1135MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Memory	256 MB
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Copier Resolution	600 x 600 dpi
Fax Capability	Yes
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Dimensions	494 x 430 x 448 mm
Print Speed	35 ppm
Standard Input Capacity	250 sheets
Copy Speed	Up to 35 cpm
Maximum Input Capacity	800 sheets (with optional paper feeders)