Kyocera ECOSYS FS-1135MFP User Manual

5
5-23
Sending Functions
Scanning Image using Application
Be sure that you connect your PC with the machine using the USB cable or network cable and install the Kyocera
TWAIN or WIA Driver. The scan can be carried out from any TWAIN or WIA compatible application program. For
details of installation for TWAIN or WIA driver, see Installing Software on page 2-15.
The following procedure is an example for scan operation using the TWAIN Driver. Operate the WIA Drivers in the
same manner.
1 Connect your computer to the machine using a USB or
network cable.
2 Place the originals in the document processor or on the
platen.
3 Use the TWAIN-compatible application to scan from your
computer.
NOTE: When the login user name and password entry
screen appears, enter them and click the OK button.
4 Choose the appropriate settings and click Scan. The
scanned data will be sent to your computer.

Kyocera ECOSYS FS-1135MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Memory	256 MB
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Copier Resolution	600 x 600 dpi
Fax Capability	Yes
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Dimensions	494 x 430 x 448 mm
Print Speed	35 ppm
Standard Input Capacity	250 sheets
Copy Speed	Up to 35 cpm
Maximum Input Capacity	800 sheets (with optional paper feeders)