Kyocera ECOSYS FS-1135MFP - Registering an Encryption Key

Setup and Registration
6-26
Registering an Encryption Key
An encryption key is required when registering the Address Book used for encryption communication (the other party
is directly entered using the numeric keys) in the sending system and when setting encryption in the receiving system.
For the creation of the encryption key, numbers from 0 to 9 and letters from A to F are arranged to form 16 numbers
and/or letters arbitrarily.
NOTE: Up to 20 encryption keys can be registered.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [FAX].
3 Press the OK key.
4 Press the  or  key to select [TX/RX Common].
5 Press the OK key.
6 Press the  or  key to select [Encryption Key].
7 Press the OK key.
8 Press the  or  key to select an unregistered
encryption key, and then press [Menu] (the Right Select
key).
9 Press the  or  key to select [Register].
NOTE: Refer to Character Entry Method on Appendix-2 for
details on entering characters.
10 Press the OK key.
11 Use the numeric keys to enter the encryption key (16
digits).
12 Press the OK key.
13 Repeat steps 8 to 12 to register other encryption keys.
Encryption Key: a b
*********************
2 Key 02
3 Key 03
[ Menu ]
1 Key 01
Menu: a b
*********************
2 Detail
3 Delete
1 Register