Kyocera ECOSYS FS-1135MFP - Selection of Transmit Terminal Identification (TTI)

2
Preparation Before Use
2-3
Selection of Transmit Terminal Identification (TTI)
The transmit terminal identification (TTI) is the information about the machine (transmit terminal) to be printed out on
the fax on the receiving system. The information includes transmission date and time, the number of transmission
pages, and the Local FAX number/ID. This machine enables the user to select if the TTI is printed out on the fax on
the receiving system. Regarding the location of the information to be printed, you can select inside or outside of the
page image being sent.
NOTE: Normally, the Local FAX Name is printed in the transmit terminal identification (TTI). However, when job
accounting has been enabled, and you send originals after entering an Account ID, the Account Name is printed.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [FAX].
3 Press the OK key.
4 Press the  or  key to select [Transmission].
5 Press the OK key.
6 Press the  or  key to select [TTI].
7 Press the OK key.
8 Press the  or  key to select the desired location for
printing the information or [Off] if you don't want to print it.
9 Press the OK key.
TTI: a b
1 Off
*********************
3 Inside
2 *Outside