Kyocera ECOSYS FS-1135MFP User Manual

5
5-15
Sending Functions
File Name Entry
This setting allows you to assign a document name to scanned images. You can specify a default for the document
name.
Use the procedure below to assign names to scanned documents that you are sending.
1 Press the Send key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the U or V key to select [File Name Entry].
5 Press the OK key. File Name Entry appears.
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
6 Enter the file name, press the OK key. Additional Info.
appears.
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
7 Enter the date and time, job number, etc. on the screen,
and then press the OK key.
NOTE: Refer to Character Entry Method on Appendix-5 for
details on entering characters.
Completed. is displayed and the screen returns to the
basic screen for sending.
8 Specify the destination, and press the Start key to start
sending.
NOTE: Press the Reset key to reset the settings selected in
Function Menu.
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T
File Name Entry: A b
doc
*
S
ABC
[ Text ]

Kyocera ECOSYS FS-1135MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Memory	256 MB
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Copier Resolution	600 x 600 dpi
Fax Capability	Yes
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Dimensions	494 x 430 x 448 mm
Print Speed	35 ppm
Standard Input Capacity	250 sheets
Copy Speed	Up to 35 cpm
Maximum Input Capacity	800 sheets (with optional paper feeders)