Kyocera ECOSYS FS-1135MFP - Selection of Telephone Line (Inch Version Only)

Preparation Before Use
2-2
Selection of Telephone Line (Inch version only)
Select the telephone line according to the type you are contracted with. Please note that selecting a wrong telephone
line will prevent you from sending fax.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [FAX].
3 Press the OK key.
4 Press the  or  key to select [Transmission].
5 Press the OK key.
6 Press the  or  key to select [FAX Dialing Mode].
7 Press the OK key.
8 Press the  or  key to select [Tone(DTMF)] ,
[Pulse(10pps)] or [Pulse(20pps)] according to the type of
telephone line you are contracted with.
9 Press the OK key.
FAX Dialing Mode: a b
*********************
2 Pulse(10pps)
3 Pulse(20pps)
1 *Tone(DTMF)