Kyocera ECOSYS FS-1135MFP User Manual

5
5-7
Sending Functions
Original Orientation
To send the document in the orientation that can be read properly, specify the upper orientation of original. To use
the functions below, select the orientation in which the original is set on the platen.
• 1-sided / 2-sided Selection
When placing the original on the platen
When placing the original on the document processor
Use the procedure below to select the orientation when placing the originals on the platen for sending.
1 Press the Send key.
2 Place the original.
3 Press the Function Menu key. Function Menu appears.
4 Press the U or V key to select [Orig.Orientation].
5 Press the OK key. Orig.Orientation appears.
[Top Edge Top] [Top Edge Left]
[Top Edge Top]
[Top Edge Left]
Function Menu: a b
*********************
2 Original Size T
3
Original Image T
[ Exit ]
1 Color Selection T
Orig.Orientation: a b
1 c Top Edge Top
*********************
2 * d Top Edge Left

Kyocera ECOSYS FS-1135MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Memory	256 MB
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Copier Resolution	600 x 600 dpi
Fax Capability	Yes
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Dimensions	494 x 430 x 448 mm
Print Speed	35 ppm
Standard Input Capacity	250 sheets
Copy Speed	Up to 35 cpm
Maximum Input Capacity	800 sheets (with optional paper feeders)