Kyocera ECOSYS FS-1135MFP - Volume Adjustment

Setup and Registration
6-8
Volume Adjustment
Adjust the volume of the speaker and monitor.
Speaker Volume: Volume of the built-in speaker when the line is connected by pressing the On Hook key.
Monitor Volume: Volume of the built-in speaker when the line is connected without pressing the On Hook key such
as in memory transmission.
1 Press the System Menu/Counter key.
2 Press the  or  key to select [Common Settings].
3 Press the OK key.
4 Press the  or  key to select [Sound].
5 Press the OK key.
6 Press the  or  key to select [FAX Speaker] or [FAX
Monitor].
7 Press the OK key.
8 Press the  or  key to select the desired volume of the
speaker.
9 Press the OK key.
FAX Speaker: a b
*********************
2 1 Minimum
3 *2 Medium
1 0 Mute