Setup and Registration
6-3
6
1 The connected telephone set makes a ringing tone. Note
that if [0] (zero) is set as the number of rings (for FAX/
TEL Auto Switch), the connected telephone does not
ring.
NOTE: You can change the number of times the ringing
tone rings. (Refer to Rings on page 6-7.)
2 When the call is from a telephone
1 The machine makes a ringing tone urging the user
to respond. Lift the handset of the telephone within
30 seconds.
NOTE: If you do not lift the handset within 30 seconds, the
machine switches to fax reception.
2 Talk to the other party.
NOTE: At the end of the conversation, you can manually
receive the originals. (Refer to Manual Reception on page 4-
9.)
When the call is from a fax
The machine starts receiving fax originals.
To Next Page
Loading...
