Kyocera ECOSYS FS-1135MFP - Page 43

3
FAX Operation (Basic)
3-15
15 Press the  or  key to select [Contact Name].
16 Press [Edit] (the Right Select key).
17 Use the numeric keys to enter the destination name to be
displayed in the Address Book. Up to 32 characters can
be entered.
NOTE: For details on character entry, refer to
Specifications (Fax function) on Appendix-6.
18 Press the OK key.
19 Press the  or  key to select [FAX Number].
20 Press [Edit] (the Right Select key).
21 Use the numeric keys to enter the destination FAX
number. Up to 32 digits can be entered.
NOTE: For details on character entry, refer to Specifications
(Fax function) on Appendix-6.
Address Recall/Pause
Pressing this key adds about three seconds of waiting time
during dialing. For example, when dialing the receiving
system on an external line, you can use this method to insert
a pause before resuming dialing after you dial a specific
number.
22 Press [Detail] (the Right Select key) and then use the 
or  key to select [Sub Address]. If you do not use Sub
Address, proceed to step 28.
23 Press [Edit] (the Right Select key).
Detail: C b
Contact Name 1/ 7
Sally
[ Edit ]
Contact Name: A b
Sally
*
S
ABC
[ Text ]
Detail: C b
FAX Number: 3/ 7
0667640000
[ Edit ]
FAX No. Entry: A b
0667640000
*
S
[ Detail ]
FAX Detail: C b
Sub Address: 1/ 4
1234567890123
OOOOOOOOOO
[ Edit ]