Kyocera ECOSYS FS-1135MFP User Manual

8-48
Default Setting (System Menu)
Collate
Set the defaults for Collate. The table below shows the available settings.
NOTE: Refer to page 3-15 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the U or V key to select [Function Default].
4 Press the OK key. The Function Default menu appears.
5 Press the U or V key to select [Collate].
6 Press the OK key. Collate appears.
7 Press the U or V key to select [Off] or [On].
8 Press the OK key. Completed. is displayed and the
screen returns to the Function Default menu.
Item Description
Collate Off Collate not performed.
On Collate performed.
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Function Default: a b
*********************
2 Scan Resolution
3 FAX Resolution
[ Exit ]
1 Color Selection
Collate: a b
1 Off
*********************
2 *On

Kyocera ECOSYS FS-1135MFP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-1135MFP
Category	Printer
Language	English