EasyManuals Logo

Kyocera ECOSYS FS-1135MFP User Manual

Kyocera ECOSYS FS-1135MFP
442 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #335 background imageLoading...
Page #335 background image
8
8-141
Default Setting (System Menu)
5 Press the U or V key to select [Secure Protocol].
6 Press the OK key. Secure Protocol appears.
7 Press the U or V key to select [LDAP Security].
8 Press the OK key. LDAP Security appears.
9 Press the U or V key to select [Off], [SSL/TLS] or
[STARTTLS].
10 Press the OK key. Completed. is displayed and the
screen returns to the Secure Protocol menu.
SMTP Security
Select the communication protocol according to the type of security employed by the SMTP server. The default setting
is Off.
NOTE: SMTP (E-mail TX) must be set to On in Protocol Detail on page 8-132.
The table below shows the available settings.
* You can change the port number using COMMAND CENTER.
Use the procedure below to make the setting.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
Secure Protocol:
a
b
2
IPP Security
3
HTTP Security
*********************
[ Exit ]
4
LDAP Security
LDAP Security:
a
b
*********************
2
SSL/TLS
3
STARTTLS
1
*Off
Item Description
Off Do not use security employed by the SMTP server.
SSL/TLS Encryption is applied any data communication. To enable SMTP security, the
SMTP port may have to be changed according to the server settings.
Typically, 465* for SSL/TLS is well-known SMTP port.
STARTTLS Encryption is applied any data communication. Typically, 25* or 587* for
STARTTLS is well-known SMTP port.
Sys. Menu/Count.:
a
b
1
Report
2
Counter
*********************
[ Exit ]
3
System

Table of Contents

Other manuals for Kyocera ECOSYS FS-1135MFP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera ECOSYS FS-1135MFP and is the answer not in the manual?

Kyocera ECOSYS FS-1135MFP Specifications

General IconGeneral
Print TechnologyLaser
Print Resolution1200 x 1200 dpi
Duplex PrintingYes
Standard Memory256 MB
ConnectivityUSB 2.0, Ethernet
Scanner TypeFlatbed, ADF
Scan Resolution600 x 600 dpi
Copier Resolution600 x 600 dpi
Fax CapabilityYes
Fax Transmission Speed33.6 kbps
Maximum Paper SizeA4
Operating System CompatibilityWindows, Mac OS, Linux
Dimensions494 x 430 x 448 mm
Print Speed35 ppm
Standard Input Capacity250 sheets
Copy SpeedUp to 35 cpm
Maximum Input Capacity800 sheets (with optional paper feeders)

Related product manuals