10-26
Troubleshooting > Troubleshooting
S
Message Checkpoints Corrective Actions
Reference
Page
Scanner memory is
full.
*1
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear
(page 8-42)
— Scanning cannot be performed due
to insufficient memory of scanner.
Only one copy of the scanned
pages is available. Select
[Continue] to print, send or store
the scanned pages. Select [Cancel]
to cancel the printing job.
The machine may reproduce the
same originals by arranging the
following settings:
• Reduce the number of originals
to be scanned at once.
Furthermore, the machine may
reproduce the same originals by
arranging the following settings:
•Select [Copy Priority] of
Optional Memory in System
Menu.
Before changing the Optional
Memory setting, contact your
administrator.
—
Scheduled sending jobs
exceeded.
— The number of jobs has exceeded
the limit set for delayed
transmission. Select [End]. The job
is canceled.
Wait until the delayed transmission
is executed, or cancel the delayed
transmission and then perform the
job again.
—
Send Error.
*1
— An error has occurred during
transmission. The job is canceled.
Select [End].
Refer to Responding to Send Error
for the error code and corrective
actions.
page 10-29
System error. — System error has occurred. Follow
the instructions on the screen.
—
To Next Page
Loading...
