Kyocera ECOSYS M3860idnf User Manual

8-18
Setup and Registration (System Menu) > System Menu
Error Handling
[System Menu/Counter] key > [Common Settings] > [Error Handling]
Select whether to cancel or continue the job when error has occurred.
Measurement
[System Menu/Counter] key > [Common Settings] > [Measurement]
Item Description
Duplexing Error Select what to do when duplex printing is not possible for the selected paper size and media type.
Value
1-sided: Printed in 1-sided
Display Error: Message to cancel printing is displayed.
Finishing Error Set alternative actions when finishing (Staple/Punch/Offset/Fold/Auto Image Rotation) is not
available for the selected paper size or media type.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
No Staple Error Set what to do when staples run out during printing.
Value
Ignore: Printing continues without stapling.
Display Error: Message to cancel printing is displayed.
NOTE
This function is displayed for the finisher models.
Paper Jam before Staple The page from which printing is resumed when a paper jam occurs during a job with stapling
can be selected.
Value
Resume at Top of Page: Resume printing from the first page of the document.
Resume at Jammed Page: Resume printing from the page where the jam occurred.
NOTE
This function is displayed for the finisher models.
Paper Mismatch Error Select what to do when the selected paper size or type does not match paper size or type
loaded in the specified paper source while printing from the computer by specifying the
cassette or multi-purpose tray.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Wrong Size Paper Loaded Set what to do when it is detected that the cassette paper size setting does not match the
actual paper size that is fed.
Value
Ignore: The setting is ignored and the job is printed.
Display Error: Message to cancel printing is displayed.
Multi Originals Fed Set the action that is executed when two or more original sheets feed at once in the automatic
document feeder.
Value
Ignore: Scanning the originals is continued.
Display Error: Message to cancel scanning is displayed.
Item Description
Measurement Select inch or metric for the unit for paper dimensions.
Value: mm, inch

Kyocera ECOSYS M3860idnf Specifications

General

Brand	Kyocera
Model	ECOSYS M3860idnf
Category	Printer
Language	English