2RV/2RW/2RX/2RY/3RA-1
2-9
Precaution for Loading Paper
Separate the paper taken out of the package in the following procedures before loading it in the cassette.
Separate paper and align the edge of the paper in a flat place.
In addition, note the following.
In case of paper fold or curl, stretch it in a straight line. Such paper may cause a jam.
If paper is left in the high humidity environment after taking the paper out of the package, it causes a trouble with mois-
ture. Keep paper remaining paper in the cassette into the sealed paper storage bag. Also, keep paper left on the MP tray
into the sealed paper storage bag.
If the machine is not used for a prolonged period, keep paper out of the cassette in the sealed storage bag in order to
protect it from humidity.
(6) Power-up
1. Turn the power switch on.
IMPORTANT
Initial Setup will take up to 10min to complete toner installation.
To Next Page
Loading...
