2RV/2RW/2RX/2RY/3RA
4-6
5. Check or replace the paper feeder roller
assembly (a) (paper feed roller, pick up
roller), and then reattach the parts in the
original position.
Attention: When reattaching to the paper
feed roller assembly (a), make sure to align
the head (c) of the feed shaft (b) to the oval
(d) of the paper feed roller assembly.
Figure 4-3
(1-2)Detaching and reattaching the retard roller
Procedures
1. Detach the cassette (a).
2. Release two hooks (b) from the back
side of the cassette and detach the
retard roller assembly (c).
Figure 4-4
b
a
b
d
c
a
b
a
c
b
b
To Next Page
Loading...
