2RV/2RW/2RX/2RY/3RA
9-9
*: Ignored depending on emulation
Paper type
(Option paper cassette 2 to 5)
X2 1: Plain
3: Preprinted
5: Bond
6: Recycled
8: Rough (except 100 V model)
9: Letterhead
10: Color
11: Prepunched
16: Thick
17: High quality
21 to 28 : Custom 1 to Custom 8
1
Cassette selection mode (PCL) X9 0: Paper selection depending on an escape
sequence compatible with HP-LJ5Si
2: Paper selection depending on an escape
sequence compatible with HP-LJ8000
0
Auto error clear at an error Y0 0: OFF
1: ON
0
Auto error clear timeout time Y1 Value in units of 5 seconds (0 to 99). 6
Paper error detection at duplex
printing
Paper size and type error detec-
tion at fixed paper source (LCD
model only)
Y3 0: Not detected
33: Detected
0
Forced duplex printing setting
(Media type is Preprinted, Pre-
punched and Letterhead only)
Y4 0: OFF
1: ON
0
PDF direct printing Y5 0: Zoom depending on paper size
1: Loads paper which is the same size as the
image
2: Loads Letter, A4 size paper depending on
the image sizeEnlarges or reduces the
image to fit in the current paper size
3: Loads Letter, A4 size paper depending on
the image size
8: Printed in full magnification
9: Loads Letter, A4 size paper depending on
the image size
10: Loads Letter, A4 size paper depending on
the image sizeEnlarges or reduces the
image to fit in the current paper size
13 to 99: Same action as default value(0)
0
Job box error control Y6 0: No error control
1: Output the error list
2: Displays the error
3: Displays the error and prints the error report
3
Items FRPO Setting value Factory set-
ting
To Next Page
Loading...
Need help?
General
Weight and Dimensions
