4-18
Printing from PC > Job Box Setting
Job Box Setting
Configures settings for Job Box.
1
Display the screen.
[Document Box] key > [▲] [] key > [Job Box Setting] > [OK] key
2
Configure the settings.
The available settings are shown below.
If the default screen of the box is set to a Custom Box, display the Job Box screen.
[Document Box] key > [Back] key > [▲] [] key > [Job Box] > [OK] key
Item Description
Quick Copy Jobs To maintain free space on the box, you can set the maximum number of
stored jobs.
Value: number between 0 and 300
When 0 is set, Quick Copy cannot be used.
JobRet. Deletion This setting specifies that documents, such as Private Printing, Quick
Copying, or Proof and Hold Printing, saved temporarily in the job box are
automatically deleted after they have been saved for a set time.
Value: Off, 1 hour, 4 hours, 1 day, 1 week
This function is valid for documents saved after the function is set.
Regardless of this function setting, temporary documents are deleted
when the main power switch is turned off.
Storage Media Select which storage media to use.
Value: SSD, SD Card
This setting is not displayed if the optional SSD or SD card is not
installed.
To Next Page
Loading...
Need help?
General