To Next Page

To Previous Page

9-3

User Authentication and Accounting (User Login, Job Accounting) > Enabling User Login Administration

Enabling User Login Administration

This enables user login administration.

Display the screen.

1 [Menu] key > [▲] [▼] key > [User/Job Account] > [OK] key

2 [▲] [▼] key > [User Login Set.] > [OK] key

Configure the settings.

1 [▲] [▼] key > [User Login] > [OK] key > [▲] [▼] key > [Login Type] > [OK] key >

[▲] [▼] key > [Netwk Authentic.] > [OK] key

2 [▲] [] key > [Netwk Auth. Set.] > [OK] key > [▲] [] key > [Server Type.] > [OK] key >

[▲] [] key > [NTLM], [Kerberos] or [Ext.] > [OK] key > [▲] [] key > [Host Name] >

[OK] key

3 Enter the host name (64 characters or less) for the Authentication Server and select the

[OK] key.

4 Select the domain name for the Authentication Server, and select the [OK] key.

If the domain has not been set, select the number where "----------------" is displayed and select

[Menu]. Select [Edit] and select the [OK] key then enter the domain name (in 256 characters or less).

Select the [OK] key and the domain will be registered.

To edit or delete a domain name that has already been registered, select that domain name and

select [Menu].

5 When selecting [Ext.] as the server type, select [▲] [] key > [Port] > [OK] key.

NOTE

If the login user name entry screen appears during operations, enter a login user name

and password, and select [

]. For this, you need to login with administrator privileges.

The factory default login user name and login password are set as shown below.

ECOSYS P6035cdn ECOSYS P7040cdn

NOTE

Select [Off] to disable user login administration.

NOTE

Up to 10 domain names can be registered.

Kyocera ECOSYS P7040cdn User Manual

Questions and Answers: