8-19
Setup and Registration (System Menu) > System Menu
Ping
[Menu] key > [ā²] [ā¼] key > [Network] > [OK] key > [ā²] [ā¼] key > [Ping] > [OK] key
Restart Network
[Menu] key > [ā²] [ā¼] key > [Network] > [OK] key > [ā²] [ā¼] key > [Restart Network] > [OK] key
Optional Network
Configure settings for the optional Network Interface Kit or Wireless Network Interface Kit.
Item Description
Protocol Detail ā
NetBEUI Selects whether or not to receive documents using NetBEUI.
*1
Value: Off, On
*1 The setting will be changed after restarting the device or the network for the machine.
LPD Select whether or not to receive documents using LPD.
*1
Value: Off, On
SMTP Select whether or not to send e-mail using SMTP.
Value: Off, On
POP3 Select whether or not to receive e-mail using POP3.
Value: Off, On
FTP(Server) Select whether or not to receive documents using FTP.
*1
Value: Off, On
LDAP Select whether or not to use LDAP.
Value: Off, On
SNMP Select whether or not to communicate using SNMP.
*1
Value: Off, On
SNMPv3 Select whether or not to communicate using SNMPv3.
*1
Value: Off, On
HTTP Select whether or not to communicate using HTTP.
*1
Value: Off, On
RAW Port Select whether or not to receive documents using RAW Port.
*1
Value: Off, On
Item Description
Ping Checks if communication with the destination by entering the host name or IP address of the
destination is possible.
If [Communication] is set to [Option NIC], this item is not displayed.
Item Description
Restart Network Restarts the network.
This menu is displayed when the optional Network Interface Kit or Wireless Network Interface Kit is installed.
To Next Page
Loading...
Need help?
General