8-18
Setup and Registration (System Menu) > System Menu
Network
Configures machine system settings.
TCP/IP Settings
[Menu] key > [ā²] [ā¼] key > [Network] > [OK] key > [ā²] [ā¼] key > [TCP/IP Settings] > [OK] key
Configures TCP/IP settings.
Item Description
TCP/IP Set up TCP/IP to connect to the Windows network.
Value: Off, On
IPv4 Setting Set up TCP/IP (IPv4) to connect to the network. This setting is available when [TCP/IP] is set to
[On].
DHCP Select whether or not to use the DHCP (IPv4) server.
Value: Off, On
Auto-IP Select whether to use Auto-IP.
Value: Off, On
IP Address Set the IP addresses.
Value: ###.###.###.###
If DHCP is set to [On], this item is displayed only and cannot be entered.
Subnet Mask Set the IP subnet masks.
Value: ###.###.###.###
If DHCP is set to [On], this item is displayed only and cannot be entered.
Default Gateway Set the IP gateway addresses.
Value: ###.###.###.###
If DHCP is set to [On], this item is displayed only and cannot be entered.
Bonjour Select whether or not to use Bonjour.
Value: Off, On
IPv6 Setting Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On].
TCP/IP(IPv6) Select whether or not to use IPv6.
Value: Off, On
RA (Stateless) Select whether to use RA (Stateless).
Value: Off, On
This setting is displayed when [TCP/IP (IPv6)] is set to [On].
DHCPv6 Select whether to use the DHCP (IPv6) server.
Value: Off, On
This setting is displayed when [TCP/IP (IPv6)] is set to [On].
After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
Need help?
General