System Menu > Network
216
[ThinPrint]
[WSD-PRINT]
[Enhanced WSD]
Item Settings
[Off/On] Set whether to use ThinPrint. To use, select [On] in these settings. The
default port number is 4000.
*1
The setting will be changed after restarting the device or network.
Value: [Off], [On]
NOTE
This feature does not appear if the optional ThinPrint Option is not
running.
[ThinPrintOverTLS] To use ThinPrint over TLS, select [On] for this setting, and for [TLS] in the
[Security], select [On].
Value: [Off], [On]
NOTE
If the setting is [On], a TLS certificate is required. The factory certificate is
the certificate owned by the machine.
[AvailableNetwork] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Off/On] Set whether to use our proprietary web services.
The setting will be changed after restarting the device or network.
Value: [Off], [On]
[AvailableNetwork] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
Item Description
[Off/On] Set whether to use our proprietary web services.
The setting will be changed after restarting the device or network.
Value: [Off], [On]
[AvailableNetwork] Set whether to enable this function for each network of Wi-Fi Direct,
Wi-Fi and wired.
Value: [Disable], [Enable]
To Next Page
Loading...
