EasyManuals Logo

Kyocera FS-1060DN User Manual

Kyocera FS-1060DN
131 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #31 background imageLoading...
Page #31 background image
2M2/2M3
1-2-11
1. Press the power switch to On.
2. Starting the toner Installation.
3. Installation is completed when toner
installation has finished and the Pro-
cessing indicator has turned on.
*: When the power switch is turned on, the
Processing indicator the Attention indica-
tor brink for a while simultaneously, then
either turns on alternatively, and only the
Processing indicator stays lit after 7 min-
utes.
Figure 1-2-21
1. While the Processing indicator is lit,
press the GO key for 3 to 10 seconds.
2. The status page will be printed.
Figure 1-2-22
Installing the toner
Make test printing

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera FS-1060DN and is the answer not in the manual?

Kyocera FS-1060DN Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution1800 x 600 DPI
Time to first page (black, normal)7.5 s
Print speed (black, normal quality, A4/US Letter)26 ppm
Printing colorsBlack
Maximum duty cycle15000 pages per month
Number of print cartridges1
Cabling technology10/100Base-T(X)
Ethernet LAN data rates10, 100 Mbit/s
Supported network protocols (IPv4)TCP/IP
Processor modelARM926EJ
Maximum internal memory- MB
Sound pressure level (printing)50 dB
Total input capacity250 sheets
Total output capacity150 sheets
Total number of input trays2
Maximum print size216 x 356 mm
Paper tray media typesBond paper, Card stock, Envelopes, Labels, Plain paper, Pre-Printed, Recycled paper
Paper tray media weight60 - 220 g/m²
ISO A-series sizes (A0...A9)A4, A5
Maximum ISO A-series paper sizeA4
Standard interfacesUSB 2.0
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage220 V
AC input frequency50 Hz
Power consumption (printing)134 W
Product colorBlack, White
Networking featuresFast Ethernet
Networking standardsIEEE 802.3, IEEE 802.3u
Compatible operating systemsWindows Vista 32/64 bit\\r Windows XP 32/64 bit\\r Windows 7 32/64 bit\\r Windows Server 2003\\r Windows Server 2008 32/64 bit\\r Mac OS X
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)358 x 276 x 241 mm

Related product manuals