Kyocera FS-1060DN User Manual

2M2/2M3
1-4-18
1-4-6 Error Messages
If a problem has occurred in the printer, the indicators on the operation panel, the KYOCERA Net client, and
the Status Monitor
will show the status of the printer. Problems that can be resolved by the user are described below.
Indicators
If the Attention indicator is lit or flashing, check the KYOCERA Net client.
Figure 1-4-5
* : If the indicators light or flash repeatedly in manners not described above, a service error has probably
occurred. Switch off the printer power switch, unplug the power cord, and then plug the power cord
back in and switch on the power switch. This may clear the error.
If the error is not cleared, see page 1-4-4.
Message Displayed in
KYOCERA Net client,
and the Status Monitor
Meaning Remedy
Add paper There is no paper in the paper
source.
Load paper into the paper source.
The paper size and paper type set-
tings selected at the time of printing
are different from the KYOCERA
Net client settings.
Check the paper size and paper type set-
tings.
Add toner The toner has run out. Replace with a new toner container.
Adding toner The printer is installing toner. Please wait.
Cover open The rear cover or front cover is
open.
Close the rear cover or front cover.
Error has occurred An error has occurred in the printer. Check the printer.
This message is displayed if the
installed toner container's regional
specification does not match the
machine’s.
Install the specified toner container.
Invalid driver The printer connected to the cur-
rent port is not supported by the
printer driver.
Use a printer driver for this port that
matches the printer.

Kyocera FS-1060DN Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1800 x 600 DPI
Time to first page (black, normal)	7.5 s
Print speed (black, normal quality, A4/US Letter)	26 ppm
Printing colors	Black
Maximum duty cycle	15000 pages per month
Number of print cartridges	1
Cabling technology	10/100Base-T(X)
Ethernet LAN data rates	10, 100 Mbit/s
Supported network protocols (IPv4)	TCP/IP
Processor model	ARM926EJ
Maximum internal memory	- MB
Sound pressure level (printing)	50 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Total number of input trays	2
Maximum print size	216 x 356 mm
Paper tray media types	Bond paper, Card stock, Envelopes, Labels, Plain paper, Pre-Printed, Recycled paper
Paper tray media weight	60 - 220 g/m²
ISO A-series sizes (A0...A9)	A4, A5
Maximum ISO A-series paper size	A4
Standard interfaces	USB 2.0
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
AC input voltage	220 V
AC input frequency	50 Hz
Power consumption (printing)	134 W
Product color	Black, White
Networking features	Fast Ethernet
Networking standards	IEEE 802.3, IEEE 802.3u
Compatible operating systems	Windows Vista 32/64 bit\\r Windows XP 32/64 bit\\r Windows 7 32/64 bit\\r Windows Server 2003\\r Windows Server 2008 32/64 bit\\r Mac OS X

Weight and Dimensions

Dimensions (WxDxH)	358 x 276 x 241 mm