Kyocera FS-1124MFP

Default Setting (System Menu)
8-20 OPERATION GUIDE
• Auto Panel Reset …8-30
• Low Power Timer …8-32
• Unusable Time …8-33
Date/Time
Set the date and time for the location where you use the machine. If you perform Send as E-mail, the date and
time set here will be displayed on the header.
CAUTION: Be sure to set Time Zone before the Date/Time setup.
Use the procedure below to set the date and time.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
2 Press the OK key. The Common Settings menu
appears.
3 Press the U or V key to select [Date Setting], and
press the OK key.
4 A login screen will appear. Then, enter the login
user name and password with device administrator
privileges to log in, and press [Login] (the Right
Select key).
The default setting of login user name and
password is 2400.
5 The Date Settings menu appears.
6 Press the U or V key to select [Date/Time].
Sys. Menu/Count.: a b
3 System
4 Administrator
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Login User Name: L b
********************
Login Password:
[ Login ]
Date Setting: a b
*********************
2 Date Format
3 Time Zone
[ Exit ]
1 Date/Time