Default Setting (System Menu)
OPERATION GUIDE 8-21
8
7 Press the OK key. The screen to enter the date of
Date/Time appears.
8 Set the date.
Press the Y or Z key to move to the item (Year /
Month / Day) you want to enter.
Press the U or V key to set each item.
9 Press the OK key. The screen to enter the time of
Date/Time appears.
10 Set the time.
Press the Y or Z key to move to the item (Hour /
Min. / Second) you want to enter.
Press the U or V key to set each item.
11 Press the OK key. Completed. is displayed and the
screen returns to the Date Settings menu.
NOTE: If you try to change the date/time when a trial
application is running, the If you change Date/Time
setting, trial functions will be unavailable. Are you
sure? message is displayed. To change the date/time,
press [Yes](the Left Select key).
Date Format
Select the display format of year, month, and date. The year is displayed in Western notation.
Use the procedure below to select the date format.
1 In the Sys. Menu/Count. menu, press the U or V
key to select [Common Settings].
To Next Page
Loading...
