Preparation for sending scanned files via e-mail
1. Connect the machine to the network.
For details, see p.63 "Connecting with a Network Cable".
2. Specify the network settings, such as the machine's IP address.
For details, see p.69 " Configuring the Machine".
3. Configure the DNS and SMTP settings using COMMAND CENTER.
For details, see p.323 "Configuring the DNS Settings" and p.327 "Configuring the SMTP
Settings".
4. Register the destinations to the Address Book using COMMAND CENTER.
For details, see p.169 "Registering Scan Destinations".
Sending scanned files to an FTP server
You can send scanned files to an FTP server using the control panel.
Preparation for sending scanned files to an FTP server
1. Connect the machine to the network.
For details, see p.63 "Connecting with a Network Cable".
2. Specify the network settings, such as the machine's IP address.
Feature Highlights
25
To Next Page
Loading...
