Kyocera FS-C1020MFP+ - Page 27

For details, see p.69 " Configuring the Machine".
3. Register the destinations to the Address Book using COMMAND CENTER.
For details, see p.169 "Registering Scan Destinations".
Sending scanned files to a computer's shared folder
You can send scanned files to the shared folder of a computer on a network using the control panel.
CES190
Preparation for sending scanned files to a computer's shared folder
1. Connect the machine to the network.
For details, see p.63 "Connecting with a Network Cable".
2. Specify the network settings, such as the machine's IP address.
For details, see p.69 " Configuring the Machine".
3. Create a destination folder on the computer's hard disk drive, and configure it as a shared
folder.
For details, see your operating system's documentation.
4. Register the destinations to the Address Book using COMMAND CENTER.
For details, see p.169 "Registering Scan Destinations".
Sending scanned files to a USB flash disk
You can send and store scanned files on a USB flash disk using the control panel.
CES198
1. Guide to the Machine
26