EasyManua.ls Logo

Kyocera Hydro XTRM - Settings; Access to Phones Settings Menu; Wireless & Networks Settings; Wi-Fi Settings

Kyocera Hydro XTRM
175 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Settings 124
Settings
Access to Phones Settings Menu
Touch Home > > Settings.
or
Touch the status bar and slide it down, and then touch at the upper right of the
screen.
Wireless & Networks Settings
Wi-Fi Settings
The Wi-Fi settings menu lets you turn Wi-Fi on or off, set up and connect to available Wi-Fi
networks, and configure advanced Wi-Fi options.
For information about Wi-Fi features, see Wi-Fi.
Access the Wi-Fi Settings Menu
Touch Home > > Settings > Wi-Fi.
Touch to set up a Wi-Fi Protected Setup connection by pressing the set up
button on the router.
Touch to add a new Wi-Fi network.
Touch > Scan to scan for available networks.
Touch > WPS Pin Entry to set up a Wi-Fi Protected Setup connection by
entering the PIN on your router.
Touch > Wi-Fi Direct to connect to a Wi-Fi device without using a wireless
access point. The Wi-Fi client and the hotspot operation will be disabled while Wi-
Fi direct is enabled.
Touch > Advanced:
Network notification: Notifies you when an open Wi-Fi network is available.
Keep Wi-Fi on during sleep: Stays connected to Wi-Fi when the screen goes to
sleep to conserve mobile data usage.

Table of Contents

Other manuals for Kyocera Hydro XTRM

Related product manuals