Kyocera Hydro XTRM - Assign a Picture to a Contact; Copy a Contact; Assign a Ringtone to a Contact

People 47
Note: To select a type (label) for a phone number, email address, or postal address (such as
MOBILE, HOME, WORK, etc.), touch the type at the right of the field and select the
appropriate type.
Assign a Picture to a Contact
The assigned picture will be displayed when the contact calls.
1. Touch Home > > People > .
2. Touch a contact to display it, and touch > Edit.
3. Touch the contact icon to the right of the name.
4. To assign a stored picture, touch Choose photo from Gallery, select the app to use,
and locate and select a picture.
- or -
To assign a new picture, touch Take photo and take a picture by touching . Touch
to continue if you are satisfied with the picture, or touch and take another
picture.
5. You may be prompted to size the picture for use with entries. Touch and drag the
square to frame the portion of the picture to use. Touch and drag the side of the
square to resize the square and touch OK.
6. Touch SAVE to save the entry.
Copy a Contact
1. Touch Home > > People > .
2. Touch a contact to display it, and touch > Copy contact.
3. If you have joined contacts, select a contact from the available list.
4. Touch a copy destination from the available list. If you selected your SIM card as the
copy destination, read the message displayed and touch OK.
Assign a Ringtone to a Contact
Identify the caller with an assigned ringtone to the contact.
1. Touch Home > > People > .
2. Touch a contact to display it, and touch > Set ringtone.
3. Select the app to use, and then select if using the app Always or Just once.