Page 3-8
Scanner File Utility
3. Follow the instructions indicated in the wizard to continue the installation procedure.
* If you are using Windows 2000 or Windows XP operating systems, the Setup Type selection window
will be displayed. Select one of the following setup types and then proceed to the next step.
Install a server mode .......... Select this type of setup in order to share the Scanner File Utility on a File
Server, etc. (In this case, the Scanner File Utility will be usable even when you
are logged off of your computer.) (Refer to page 3-27.)
Install a desktop mode ....... Select this type of setup in order to use the Scanner File Utility independently
from others. (In this case, the Scanner File Utility will be usable once you are
logged on to your computer.)
* Once the Scanner File Utility has been installed, you can change the type of setup from the desktop
mode to the server mode by selecting “Repair” in the Windows “Add/Remove Programs” control panel.
To Next Page
Loading...
