Kyocera KM-1650

Page 2-3
The following table lists, by objective, the different settings that are possible using the WebPage Functions
interface. Use this table as a reference index when making the corresponding settings.
Make network-
related settings
Set the administra-
tion password
Change scanning-
related default set-
tings for the scanner
Register the
transmitting site’s
email address
Register the
destination
computer
Register the
destination site’s
email address
Contains explanations on the network-related settings
for the Scanner Interface Card.
Contains explanations on the administration password
that must be entered whenever you access the WebPage
Functions interface.
Contains explanations on settings for scanning images,
such as the type of originals and the scanning resolution.
Contains explanations on registering the transmitting
site’s email address for sending email (scanned data)
from the scanner to the computer.
Contains explanations on registering the destination
computer for sending data from the scanner to the
computer.
Contains explanations on registering the destination site’s
email address for sending email (scanned data) from the
scanner to the computer.
See page
2-15
See page
2-21
See page
2-23
See page
2-28
See page
2-38
See page
2-12
Index of Objectives