Page 1-17
Using the Scanner Function
(4) Color mode selection
(“Color mode”)
Sets the desired color mode.
• “A.C.S” (Auto Color System) ... Automatically determines whether the original is a black and white or a
color original and selects the appropriate mode for scanning.
• “Full Color” .............................. Performs full color scanning.
• “Black & White” ....................... Performs monochrome scanning.*
1
*1: When a function other than those bearing the symbol [B/W] has been selected for the transmission
mode, scanning will be performed in grayscale.
(5) B & W mode selection
(“B & W setting”)
Sets the desired B & W mode.
If you select “B & W”, the file size will be smaller than the others.
If you select “Gray scale”, the originals shading will be retained.
* This function is only available with scanners that possess a touch panel.
To Next Page
Loading...
