Page 1-15
Using the Scanner Function
(4) Original orientation selection
(“Orig. set direction”)
Specifies the position of the top edge of the original once the original is set.
• “Back Edge” or “Left top corner”
* If the original set direction is not selected, the scanning may not be performed correctly.
* This function is only available with scanners that possess a touch panel.
(5) Image file format selection (“File type”)
Sets the desired format of the image file.
Monochrome copiers “Black & White” ..... TIFF, PDF
“Full Color” .............................................. JPEG, PDF, TIFF
“Gray” ...................................................... JPEG, PDF, TIFF
“A.C.S” (Auto Color System) ................... JPEG, PDF, TIFF
* The original is scanned and a file is created and sent for each individual page of the scanned original when
you set JPEG format.
To Next Page
Loading...
