Page 3-135
DB Assistant
Dialogue Boxes in the DB Assistant
The DB Assistant will automatically start up after installation. However, any time you want to quit the utility
program, or whenever you want to perform settings for the PDF Keyword Assist and/or Database Assist
options, you will need to access the setup dialogue box for the DB Assistant.
(1) Accessing the Setup Dialogue Box
• When the DB Assistant is running…
Double-click on the utility’s icon in the Task Bar. The initial dialogue box for the DB Assistant will appear.
Click on Configuration... and the setup dialogue box for the DB Assistant will appear.
• When the DB Assistant is NOT running…
Click on Start in the Windows Task Bar and then select Program -> Scanner User Software -> DB Assistant
in that order from the successive menus. An icon that indicates that the utility is now running will appear in
the Windows Task Bar. Double-click on that icon, select Configuration... in the resulting initial dialogue box
and the setup dialogue box for the DB Assistant will appear.
To Next Page
Loading...
