Page 1-13
Using the Scanner Function
Basic Settings
(1) Original size selection
(“Select original size”)
The original sizes (scanning area) available for selection are as follows.
• Inch specifications: Auto, 11" x 17", Computer Form (11" x 15"), 8-1/2" x 14", 8-1/2" x 11" and
5-1/2" x 8-1/2"
* A4 is also available in monochrome copiers.
• Metric specifications: Auto, A3, Computer Form (11" x 15"), B4, Folio, A4, B5, A5 and B6
* 11" x 8-1/2" is also available in monochrome copiers.
* Factory default setting: Auto
• Custom original size (“Input size”)
Align the original with the left-rear portion of the platen and select the desired scanning area.
Acceptable scanning area ..... Length: 2" – 11-5/8", 50 mm – 297 mm
Width: 2" – 17", 50 mm – 432 mm
Width: 2" – 17", 50 mm – 420 mm (for KM-C830/830D)
* The original size cannot be entered manually when using an optional Document Processor.
To Next Page
Loading...
