Kyocera KM-1650 User Manual

Page 2-25
System Setting
• E-mail address
The email address of the user can be up to 64 single-byte characters in length.
• Address of PC with “Address Book” installed
Type the host name or IP address of the computer that contains this user’s personal Address Book into
this field.
• Save number
Type the “save number” that corresponds to the destination computer that will be used under the Scan to
PC function into this field.
* It is possible to designate a “save number” between 001 and 100.
• Signature
Type the data (personal information) that will be transmitted with the email message into this field.
• Change password
If you want to change the administration password, select “Ye s ”. If you do NOT want to change it, select
“No”.
• Old password
If a password is currently registered, type that password into this filed.
• New Password
If you want to change the administration password, type a new password into this field (up to 8
characters).
* The password that you register here is NOT related to the 4-number password that is required in order to
access the Network screen in the scanner itself.
• Confirm new password
Type the same password as you did in the New Password field in here.
* This procedure is necessary in order to ensure that the password was entered correctly.

Kyocera KM-1650 Specifications

General

Print Technology	Laser
Print Speed	16 ppm
Max Resolution	600 x 600 dpi
Paper Capacity	300 sheets
Memory	32 MB
Functions	Print, Copy, Scan
Type	Monochrome
Grayscale Half-Tones	256 levels
Max Document Enlargement	200%
Max Document Reduction	50%
Output Trays Capacity	250 sheets
Monthly Duty Cycle	15, 000 pages
Scan Type	Flatbed
First Copy Out Time B/W	5.9 seconds
Supported Media Type	Plain paper
Max Media Capacity	1, 300 sheets
Interface	USB 2.0
Original Size	A3 (11.7 in x 16.5 in) (max)