2JL/2JJ/2JG/2JD-1
1-3-112
2. Select [Printer error report] using the cursor up/
down keys and press [Change #].
3. Select [On] or [Off].
4. Press [Close].
Printing from unregistered sources (printer)
Authorize or prohibit printing from computers with printer
drivers that do not support Job Accounting.
This item is not shown when Printer Job Accounting is set
to [Off].
1. Press [Job Accntg Def. Set.].
2. Select [Other Mgt. reg. (print)] using the cursor up/
down keys and press [Change #].
3. Select [On] or [Off].
4. Press [Close].
Copy/printer output management
Select whether copying and printing are managed
together or separately.
1. Press [Job Accntg Def. Set.].
2. Select [Copy/Printer output mgt] using the cursor
up/down keys and press [Change #].
3. Select [All] or [Each].
4. Press [Close].
Scanner job accounting
Activate or deactivate Job Accounting when the device is
used for scanning.
1. Press [Job Accntg Def. Set.].
2. Select [Scanner Job Accounting] using the cursor
up/down keys and press [Change #].
3. Select [On] or [Off].
4. Press [Close].
Fax job accounting
Activate or deactivate job accounting when the optional
fax function is used.
This setting is displayed when the optional fax kit is
installed.
1. Press [Job Accntg Def. Set.].
2. Select [Fax Job Accounting] using the cursor up/
down keys and press [Change #].
3. Select [On] or [Off].
4. Press [Close].
Response to unauthorized requests
Specify the actions when users attempt to copy in excess
of the specified copy limitation.
1. Press [Job Accntg Def. Set.].
2. Select [Excess of Limit Setting] using the cursor up/
down keys and press [Change #].
3. Press [Stop job immediately], [Stop after job done]
or [Only warning].
4. Press [Close].
Default counter limit value
Specify the default of usage limitation when registering a
new department.
1. Press [Job Accntg Def. Set.].
2. Select [Def. Val. of coun. Limit] using the cursor up/
down keys and press [Change #].
3. Enter the number of pages from 1 to 999,999 using
the numeric keys.
4. Press [Close].
Total count by size, 1-5
Registers specific paper sizes and types of paper to
check the copy count.
1. Press [Job Accntg Def. Set.].
2. Select [Total size 1-5] using the cursor up/down
keys and press [Change #].
3. Press [On].
4. Press [Select Size].
5. Select a paper size and press [Close].
6. To specify a paper type, press [Select Paper Type].
7. Select the paper type and press [Close].
8. Press [Close].
To Next Page
Loading...
Need help?
General
