3S3
1-4-1
1-4 Assemb ly and Disassembly
1-4-1 Precautions for assembly and disassembly
(1) Precautions
Be sure to turn the power switch off and disconnect the power plug before starting disassembly.
When handling PWBs, do not touch connectors with bare hands or damage the board.
Do not touch any PWB containing ICs with bare hands or any object prone to static charge.
Use only the specified parts to replace the fixing unit thermostat. Never substitute electric wires, as the copier may be seri-
ously damaged.
To Next Page
Loading...
Need help?
General