2K5
1-3-69
U342
Setting the ejection restriction
Description
Sets or cancels the restriction on the number of sheets to be ejected continuously when the internal eject tray
is selected as the eject location.
Purpose
According to user request, sets or cancels restriction on the number of sheets.
Setting
1. Press the start key.
2. Select [ON] or [OFF].
Initial setting: ON
Details of restriction (number of sheets to be ejected continuously after the start key is pressed)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U343
Switching between duplex/simplex copy mode
Description
Switches the initial setting between duplex and simplex copy.
Purpose
To be set according to frequency of use: set to the more frequently used mode.
Setting
1. Press the start key.
2. Select ON or OFF.
Initial setting: OFF
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Maintenance
item No.
Description
Display Description
ON Sets restriction on the number of sheets
OFF Cancels restriction on the number of sheets
Condition Number of sheets
When no optional ejection device is installed 250 sheets
When the job separator is installed 150 sheets
When the finisher is installed 100 sheets
Display Description
ON Duplex copy
OFF Simplex copy
To Next Page
Loading...
