2K5
1-5-47
(7) Detaching and refitting the fuser thermistor 2
Follow the procedure below to replace the fuser thermistor 2.
Procedure
1. Remove the fuser unit (see page 1-5-37).
2. Unhook four hooks and remove the fuser
unit cover.
3. Remove the connector.
4. Remove the band.
Figure 1-5-85
5. Remove the screw and remove the fuser
thermistor 2.
6. Replace the fuser thermistor 2 and install
the thermistor.
7. Refit all the removed parts.
Figure 1-5-86
Fuser unit cover
Hook
Hook
Hook
Hook
Connector
Band
Screw
Fuser thermistor 2
To Next Page
Loading...
