Sending Functions
5-4 OPERATION GUIDE
Relationship between Original Size, Sending Size, and Zoom
Original Size (page 5-2), Sending Size, and Zoom (page 5-5) are related to each other. Refer to the following
table.
NOTE: When you select Sending Size that is different from Original Size, and select the Zoom [100%], you
can send the image as the actual size (No Zoom).
Use the procedure below to select the size for transmission when sending scanned images.
1 Press the Send Key.
2 Place the originals on the platen.
3 Press [Original/Sending Data Format] and then
[Sending Size].
4 Press [Standard Sizes 1], [Standard Sizes 2], or
[Others] to select the sending size.
5 Press [OK].
6 Specify the destination, and press the Start key to
start sending.
Original Size and the size you
wish to send as are
the same different
Original Size Specify as
necessary
Specify as
necessary
Sending Size Select [Same as
Original]
Select the
required size
Zoom Select [100%]
(or [Auto])
Select [Auto]
To Next Page
Loading...
