Default Setting (System Menu)
8-38 OPERATION GUIDE
Use the procedure below to specify an LF action.
1 Press the System Menu key.
2 Press [Printer], [ ] and [Change] of LF Action.
3 Press [LF Only], [LF and CR] or [Ignore LF].
4 Press [OK].
CR Action
Set the character return action when the machine receives the character return code (character code 0DH). The
table below shows the available settings.
Use the procedure below to specify a CR action.
1 Press the System Menu key.
2 Press [Printer], [ ] and [Change] of CR Action.
3 Press [CR Only], [LF and CR] or [Ignore CR].
4 Press [OK].
Paper Feed Mode
While printing from the computer, select how to feed paper when the paper source and type are specified. The
table below shows the available settings.
Use the procedure below to select the paper feed mode.
1 Press the System Menu key.
2 Press [Printer], [ ] and [Change] of Paper Feed Mode.
3 Press [Auto] or [Fixed].
4 Press [OK].
Item Description
CR Only Only character return performed.
LF and CR Character return and line feed performed.
Ignore CR No character return performed.
Item Description
Auto Search the paper source that matches the selected paper size and type.
Fixed Print on paper loaded in the specified paper source.
To Next Page
Loading...
