Sending Functions
OPERATION GUIDE 5-31
5
FTP Encrypted TX
This allows you to encrypt documents when you send them. If you select [On] in this option, you can then select
the encryption method in the basic send screen.
Use the procedure below to scan and send originals as encrypted files.
1 Press the Send Key.
2 Place the originals in the document processor or on
the platen.
3 Press [Advanced Setup], [ ], and then [FTP
Encrypted TX].
4 Press [On].
5 Press [OK].
NOTE: Click Advanced -> Secure Protocols in the
COMMAND CENTER. Be sure that SSL of Secure
Protocol Settings is On and one or more effective
encryption are selected in Clientside Settings. For
details, refer to the KYOCERA COMMAND CENTER
Operation Guide.
Color Type
This sets the color type when you send color documents. The table below shows the available settings.
Selecting RGB displays the color profile values set on the machine.
1 Press System Menu key.
2 Press [Send] and [Change] of Color Type.
3 Select [RGB] or [sRGB].
4 Press [OK].
Item Detail
RGB –
sRGB Match the color reproduction space between sRGB compatible systems.
To Next Page
Loading...
