Default Setting (System Menu)
8-50 OPERATION GUIDE
Use the procedure below to set the automatic error clear delay.
1 Press the System Menu key.
2 Press [ ], [Date/Timer], [ ] and then [Change] of Error Clear Timer.
3 Press [+] or [–] to enter the time until printing restarts.
You cannot use the numeric keys to enter this value.
4 Press [OK].
Interrupt Clear Timer
Set the period after which the machine reverts to Normal mode when it has been set to Interrupt Copy mode
and then left unused. Any period between 5 and 495 seconds (in five-second increments) can be set.
The procedure for setting the interrupt clear timer is explained below.
1 Press the System Menu key.
2 Press [ ], [Date/Timer], [ ] and then [Change] of Interrupt Clear Timer.
3 Press [+] or [-] to enter the time for the interrupt clear timer.
4 Press [OK].
To Next Page
Loading...
