Management
11-6 OPERATION GUIDE
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to Adding a User on page 11-5 for
the default login user name and password.
5 Press [Next] of User Login Setting, [Register/Edit]
of Local User List, and then [Add].
6 Press [Change] of User Name.
7 Enter the user name and press [OK].
NOTE: Refer to the Character Entry Method on
Appendix-10 for details on entering characters.
8 Enter the login user name and E-mail address
following 6 and 7 above.
9 Press [Change] of Login Password and then
[Password].
10
Enter the login password and press [OK].
11
Press [Confirm Password].
12 Enter the same login password to confirm and
press [OK].
13
Press [OK].
14
Press [Change] of Access Level.
15
Select the user access privilege and press [OK].
16
Press [Change] of Account Name.
17
Select the account and press [OK].
NOTE: Select [Name] and [ID] from the Sort pull-down
menu to sort the account list.
Press [Search(Name)] or [Search(ID)] to search by
account name or account ID.
18
Press [Register] to add a new user on the local user
list.
To Next Page
Loading...
