EasyManua.ls Logo

Kyocera TASKalfa 650c - COMMAND CENTER Overview

Kyocera TASKalfa 650c
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1 OVERVIEW
8 Scan Features
Web Service (WS) Scan
Web Service (WS) Scan uses the functions of Windows Vista to scan images from a client computer through the network.
The images scanned on the equipment can be loaded to your client computer and viewed via an application supporting
the Windows Imaging Acquisition (WIA) Scan Driver.
To learn more about WS Scan, see the following section:
P.27 “Web Service (WS) Scan”
Scan speed
The scan speed depends on the selected color mode and resolution settings.
The approximate scan speed (for printing A4/LT) under each condition is listed in the table below.
The color mode and resolution settings can be changed on the COMMON SETTING screen. For details, see the following
sections:
P.34 “Specifying color mode”
P.35 “Specifying resolution”
Templates
Once you register a template, you can easily perform scan operations by recalling pre-set scan settings.
For instructions on how to register and use templates for scanning, see the following sections:
P.61 “USING TEMPLATES”
Perform scanning from the control panel
or through remote operation using
a WIA-compliant application.
Load a scanned image into
the WIA-compliant application.
Install the driver in advance.
Windows Vista
Originals
Color Mode Resolution Scan Speed
Black 100 dpi
150 dpi
200 dpi
300 dpi
77 pages/minute
400 dpi 66 pages/minute
600 dpi 62 pages/minute
Gray Scale/Full Color/
Auto Color
100 dpi
150 dpi
200 dpi
300 dpi
77 pages/minute
400 dpi 66 pages/minute
600 dpi 53 pages/minute

Table of Contents

Other manuals for Kyocera TASKalfa 650c

Related product manuals