3.USEFUL FUNCTIONS
Changing Common Settings 37
3 USEFUL FUNCTIONS
Changing orientation
With the rotation setting, you can change the orientation of your scans. If necessary, select the desired rotation pattern
from the following options:
—Select this option to scan originals without a change in orientation.
—Select this option to rotate your scans 90 degrees to the right.
—Select this option to rotate your scans 180 degrees.
—Select this option to rotate your scans 90 degrees to the left.
Changing compression ratio
You can select the compression ratio for the scanned image data. In general, the higher the compression ratio, the lower
the image quality. Select from the following options:
[LOW]—Select this option to apply a low compression ratio and enhance the image quality.
[MID
]—Select this option to compress the data with a moderate compression ratio and obtain an average image quality.
[HIGH]—Select this option for a high compression ratio. This option is suitable when you want to minimize the data size
rather than enhance the image quality.
The compression ratio setting is not available in either of the following conditions:
y [SLIM PDF] is selected as the file format setting.
y [BLACK] is selected as the color mode setting.
To Next Page
Loading...
