5 OTHER SCANNING METHODS
Scanning Images Using the HS WIA Driver 77
Scanning Images Using the HS WIA Driver
The Client Utilities CD-ROM also includes the HS WIA Driver for users of Windows XP/Vista/Server 2003/Server 2008.
This driver can be used together with a WIA-compliant application, such as Microsoft Paint supported by Windows XP or
Windows Vista, to scan images on the equipment and load them to your client computer.
For instructions on how to install the driver, refer to the Software Installation Guide. For instructions on how to scan and
acquire images to your computer, refer to the documentation that comes with your WIA-compliant application.
If you are using Windows XP or Windows Server 2003, follow the procedure below to register this equipment to the HS
WIA Driver after the installation of the driver.
1. Double-click [Scanners and Cameras] of [Control Panel].
2. Right-click [HS WIA Driver] and then click [Properties].
3. Click [Discover] on the [Device Setting] tab menu.
4. Click [Start Discovery].
5. Select this equipment and then click [OK].
6. Click [OK].
Scan originals using
the HS Remote Scan Driver
Originals
Import your scans to
a WIA-compliant application
Windows XP
Windows Vista
Windows Server 2003
Windows Server 2008
Connecting over TCP/IP Network
To Next Page
Loading...
