Settings Pages
Adding a New User Login
1
Click User Login, open the User Login page.
2
Click Add and enter the information of the user.
3
Click Submit.
Editing a User Login
1
Click User Login, open the User Login page.
2
Click the desired Login User Name or User Name to edit the user and modify
their information.
3
Click Submit.
Deleting a User Login
1
Click User Login, open the User Login page.
2
Check the desired user. When the check box on the left side of Login User
Name is selected, all users displayed on the page will be checked.
3
Click Delete. The User Login - Delete page appears. You can confirm the
users to be deleted.
4
Click Delete when the desired users are selected.
Basic > Security > Certificates
This page allows you to create or update certificates or check details on
certificates. After you have changed this setting, you must restart this machine.
For the restarting procedure, refer to Basic > Defaults > Reset on page 6-6.
Device Certificate - Self Issued
The self-issued certificate is automatically issued by default. The automatically
issued certificate has the country code, common name, and a validity period of
about 10 years already configured.
Self Certificate
Displays whether the certificate is active.
Expiration
Displays the validity period of the certificate.
View Certificate
Click View to view details on the certificate.
Create Certificate
Click Create to create a certificate.
Country code and common name are mandatorily required. On Windows
Vista/7, the common name and the access name (host name or IP address)
must be identical.
COMMAND CENTER RX
6-9
To Next Page
Loading...
